How to Install/Flash Android 5.0 Lollipop in Nexus 10

Before Install/Flash Android 5.0 Lollipop in Nexus 10

• This method is only for Nexus 10 Wifi model only.
• Download and Install USB Drivers for your Nexus 10 from here.
• Enable USB Debugging in your device. Click Here if you don’t know how to enable USB Debugging.
• Create a backup of all your important data and contacts.

Warnings before Install/Flash Android 5.0 Lollipop in Nexus 10

• There are certain risks of damaging your Android Smartphone while Rooting/Installing Custom/Stock ROM in it. Hence, it is recommended that you proceed at your own risk and we are not to be held responsible even if your Smartphone gets damaged during or after completing the Rooting/Custom/Stock ROM installation process.

Download Required Files:

• Stock ROM Factory Image : Click Here
• ADB & Fastboot : Click Here

How To Install Android 5.0 In Nexus 10:

• First of all follow all the steps given above properly.
• Download and extract ADB & Fastboot zip file in a folder.

• Now download and extract the Factory image and you will another compressed file, Open it and extract it in folder where ADB and Fastboot files are extracted by you. You will get following files after extracting :
  • bootloader image
  • radio image
  • flash-all.bat
  • flash-all.sh
  • flash-base.sh
  • image-hammerhead-lrx21o.zip
• Boot your Nexus 10 in bootloader mode now. Power off your device and then press and hold volume Down + power button until you boot into bootloader mode.
• Connect your device to PC with USB Cable (Make sure your device is connected properly and USB Drivers are installed).
• Run the flash-all.bat/flash-all.sh/flash-base.sh script depending on your desktop OS.
• Now just sit back and let the script do his work. After completion of process your device will automatically reboot.
• First reboot may take while (5-10 minutes) so don’t get panic.

That’s it!! Your Nexus 10 is successfully updated to Android 5.0 Lollipop.